PermaClone™ 46mm Cloning Collars – Fits TurboKlone®, OxyClone®, Clone King® 25-site, and Most 2” Net Pot Systems

Click here for collars fitting the 36 and 64-site Clone King Collars

Don't see your system name or size? ...email Contact and ask!

We Ship Globally. Free International Shipping for Orders over $100 USD. 

Features:

• The only 100% Heat AND Chemical sterilizable cloning collar.
• Food grade, 3rd party tested to ensure U.S. and E.U. compliance.
• Nanotechnology allows microwave sterilization in minutes.
• Shaped to allow efficient, fail-proof Dunk-Based™ sterilization.
• Surface chemistry resists root growth into the collar.
• Backed by a 5 YEAR WARRANTY!

Free Domestic AND 1/2 Price international Shipping. 

Purchase Volume:

500+ = 10% off
1500+ = 15% off
3000+ = 20% off
5000+ = 25% off
10,000+ = 30% off
20,000+ = 40% off

The Most Durable, Fully Sterilizable 46mm Cloning Collars Made for High-Performance Cloning Machines

PermaClone™ 46mm collars are engineered specifically for growers using TurboKlone®, OxyClone®, Clone King®, and other systems that require a mid-sized collar diameter between 41mm and 48mm. This sizing is notoriously hard to find — and even harder to find in a collar that can withstand repeated chemical sanitizing AND heat sterilization without degrading.

Made from a proprietary, medical-grade polymer blend, PermaClone 46mm collars are designed for full sterilization cycles including:

• Microwave

• Dry heat (up to 300°F / 150°C)

• Pressure cooker / autoclave

• Bleach

• Peroxide

• Hypochlorous acid (HOCl)

• Zerotol

• Physan 20

Unlike neoprene or foam inserts that soak up contaminants, break down under oxidizers, and warp after a few uses, PermaClone collars remain non-porous, flexible, and contamination-resistant for 5–10+ years. Their ellipsoid compression design prevents stem pinching while maintaining a consistent seal around your cuttings.

If you run perpetual cycles, or if you deal with heat, humidity, or root-borne pathogens, these collars provide the consistency you need to eliminate failure points.

⭐ Key Benefits

• Designed for TurboKlone®, OxyClone®, Clone King®, and 46–47mm net pots

• Completely sterilizable using heat or chemicals

• Non-porous material = no microbial absorption

• Durable for 5–10+ years of continuous use

• Ellipsoid compression reduces stem damage

• Maintains shape after repeated heat cycles

• 100% reusable, saving money vs foam inserts

• Backed by PermaClone’s 5-year warranty

⭐ Compatibility Chart

⭐ Why PermaClone Beats Foam / Neoprene

⭐ How to Sterilize (3 Options)

1. Microwave Sterilization

• Load 6–180 collars in a turkey bag

• Add 1 cup of water

• Microwave 1000W for 15 minutes

2. Dry Heat

• Bake at 300°F (150°C) for 1–2 hours

• Let cool naturally

3. Chemical Dunk

• Use 5 mL/gal bleach or HOCl

• Soak for 8–12 hours

• Dunk rinse + store dry

⭐ Troubleshooting Guide

Roots turning brown / slime?
→ Sterilize collars + manifold + pump. Follow PermaClone Method.

Clones wilting early?
→ Run pump continuously for first 24 hours.

⭐ FAQs

Q1: Will these fit TurboKlone?

Yes. 46mm is the native TurboKlone size.

Q2: Can I autoclave these?

Yes — the polymer blend is autoclave-safe.

Q3: Are they chemical-safe?

They withstand bleach, peroxide, HOCl, Zerotol, and Physan 20.

Q4: Will roots grow into the collars?

No. The surface is too smooth and non-porous for penetration.

Q5: How long do they last?

5-year warranty, but typical lifespan is 5–10+ years.

Q6: Can these be microwaved?

Yes — 100% microwave safe.

Q7: Do these work with 2” DIY systems?

Yes, as long as your pot opening is ~46–47mm.

⭐ Related Guides

• PermaClone Manual — The Complete PermaClone Method

• Mother Plant Prep: Boost Clone Success

• How to Sterilize Cloners 

⭐ SEO Keywords to Target (PC46)

PermaClone is a registered trademark of PhenoSeleX, a Texas Corporation. Some references may appear on this website or product descriptions to trademarks belonging to others not affiliated with PermaClone or PhenoSeleX, including contacts which may not display the ® symbol. All references to other trademarks belonging to third parties or referring to branded products and/or cloning systems that appear on this website shall be understood to refer to those registered trademarks owned by others, and not to any trademark belonging to PermaClone or PhenoSeleX, INC.